36 | 3 Marvell Configuration Utility |
To use WPA 802.1x EAP/TLS, proceed as follows:
1.In the field “Authentication Mode”, select 802.1X.
2.In the field “Encryption Method”, select TKIP or WEP.
3.From the pulldown menu under “802.1x Authentication Protocol” select EAP/TLS (USE
CERTIFICATE).
4.Click the CONFIGURE WPA RADIUS button to configure the security settings for WPA EAP/ TLS.
The window “WPA EAP/TLS Radius Configuration” is displayed.
Figure 32. WPA Radius Configuration
5.Click the BROWSE button.
The window “Select Certificate” is displayed.
Figure 33. Select Certificate
6.Select the desired certificate.
7.Click SELECT.
The window “WPA Radius Configuration” is displayed again and the name of the selected certificate appears in the field “Certificate”.