Advanced Tab | 45 |
Protocol
This section of the Advanced tab sets the “Protocol” options.
Figure 46. Advanced – Protocol Section
•“Power Save Mode” – sets the power mode:
•CONTINUOUS ACCESS
•MAX POWER SAVE
•“Preamble (802.11b)” – sets the radio preamble (takes effect only when attaching to
802.11b networks):
•AUTO
•LONG
•“Transmit Antenna” – transmit antenna mode is set to ANTENNA 2
•“Receive Antenna” – sets the receive antenna mode:
•DIVERSITY ON
•DIVERSITY OFF
•“Transmit Rate” – the range of the data rate depends on the type of access point that the SysKonnect Cardbus Adapter is connected to. The default setting is AUTO.
•“Fragment Threshold” – sets the fragmentation threshold (i.e., the size that packets are fragmented into for transmission). The default setting is 2346.
•“RTS/CTS Threshold” – sets the packet size at which the access point issues an RTS (or CTS) frame before sending the packet. The default setting is 2346.
The APPLY CHANGES button configures the options according to the changes entered, whereas the DEFAULT button applies the default values.
MiscellaneousThis section provides further protocol options.
Figure 47. Advanced – Miscellaneous Section
•Auto connect if link loss or no connection (Use checked profiles in <Profile Manager>) – Disabling this checkbox disables the