T+A Elektroakustik user manual Remote control of the CC 820 M, General information

Remote control of the CC 820 M

General information

The M-System is supplied complete with the F6 remote control handset, which provides remote control of all the player’s most important functions.

In the drawing alongside the buttons marked "" are those required to control the cassette recorder. None of the other buttons affect the cassette deck.

selects TAPE 1 as program source

	During STOP:	starts playback side A
	During PAUSE:	Resuming playback of side A
	During playback:	Selects next title
	During STOP:	starts playback side B
	During PAUSE:	Resuming playback of side B
	During playback:	Selects previous title

 Rewind / Fast forward

Rewind and fast forward. If the tape drive reaches the end of the tape (or the tape counter position '0,00' if MEMORY STOP is switched on), then it stops. The display shows 'STOP'.

If either the  or  button is held pressed in for about one second during fast forward or rewind, then the tape drive will stop when it reaches the end of the tape (or the tape counter position '0,00' if MEMORY STOP is switched on), then immediately starts the playback process in the last used direction.

During playback: Interrupt playback

During PAUSE: Resuming playback

brief press: End playback, open drawer, close drawer

brief press: Opening the Special Functions menu (see 'Special Recorder Functions')

Menu		In Select menus the following buttons are used for navigation
control		within the menu:
			up
		left	right
			down

Closing the Select menu

Select / confirm button

31