TAG SV-100-M-DVR 6 Procedures

Operations Manual

SV-100-M-DVR

Part Number: 1008148 Page 24 of 54

Version 1.0. 08/18/2009

6 Procedures The procedures within this Chapter contain

relevant information to ensure the SV-100-M-

DVR maintains its maximum performance

potential.

1. Check to make sure that all the cables are

seated and connected correctly to the back of

the unit such as keyboard, mouse, monitor

video cable and both power cables.

2. Connect video, touch screen USB, audio and

power cables to the display CBP-19SW.

3. Press the momentary power switch on the

server one time to turn the server on.

4. Press the power button on the display to turn

the display on.

5. Once the server starts, System will go thru

Power On self Test (POST) (no action is

required at this time)

6. At windows dialog box press Ctrl+Alt+Delete

at once to login

7. Type in the correct user name and password

and then press enter to login

8. Once the operator is logged on to the unit they

could use the computer as they wish.

NOTE: Assuming the SV-100-M-DVR is not

connected to any network.

1. The operator needs to save all data, and then

close all applications.

2. Once all data is saved and applications are

closed, click on Start menu, select shutdown

and then click OK to shutdown the computer.

In most cases a user (startup) password and a

supervisor (setup) password can be set in the

CMOS. When a Setup password is required,

the computer will prompt for it when you try to