EVERY CALL COUNTS 5
1. Select the IP Configuration page. By default, Obtain IP and DNS information
automatically is selected and the area shows IP addresses from the router.
2. Change Obtain IP and DNS information automatically to Use configured IP and
DNS information in order to lock in the IP addresses.
3. In some cases, the System IP Settings area may be blank because your router
has not delivered the IP addresses. If so, enter the following IP addresses from
your LAN administrator:
a) Enter a static IP address for each TalkSwitch unit in the Unit IP
address boxes.
b) Enter the Subnet mask for the LAN. This address determines the subnet
that the unit IP addresses belong to.
c) Enter the IP address of the Default gateway on your network. A gateway is
a hardware device that connects the office network to the Internet. The
router may act as default gateway.
d) Enter the IP address of the Preferred DNS server. DNS is a service that is
used to resolve a domain name to an IP address. The router may act as
DNS server.
e) If applicable, enter the IP address of the Alternate DNS server.