EVERY CALL COUNTS 15
SETTING UP A TALKSWITCH PROFILE FOR A SIP CLIENT
The TalkSwitch profile for a SIP client contains registration details and
authentication information.
1. Start the TalkSwitch management software, and connect to the TalkSwitch
system that will act as the SIP client.
2. Select the VoIP Configuration page.
3. Select Profile TS, which is for configuring the TalkSwitch profile.
4. Leave the This TalkSwitch location is the proxy/registrar check box cleared.
5. Enter the Current public IP address or Fully qualified domain name (FQDN) of
the SIP server into the Proxy/registrar server name box.
If the SIP server is using a non-default SIP signalling port (i.e. if the SIP server
is not using 5060 as the SIP signalling port), specify the port number after a
colon at the end of the public IP address or FQDN (e.g.123.45.67.89:3456).
6. Enter the User/account name from the SIP server. All SIP clients must use
this name.
7. Enter the Password from the SIP server. All SIP clients must use this password.
YZ
[\
]
^