Specifications User guide
86
Multi-copy sheets Sets of form s may be used only if the top edge is
bound. The binding edge should be as soft as pos-
sibl e. A w avy binding edge ma y hamper the smooth
feeding of these sets. Multi-part forms have to be
inserted with the glued top facing down. Multi-part
forms should be tested for suitability.
Paper quality Light pulp paper of medium fine quality, paper bear-
ing the quality mark SM Post and photocopy paper
are suitable for use.
Unsuitable are: satin-finisch or coated papers, imi-
tation art papers, and embossed papers.
Since paper as natural mater i al reacts strongly to
environmental influences (e.g. humidity, tempera-
ture), the place of storage should be selected care-
fully. We recommend that this kind of paper should
be tested extensively before larger quantities are
acquired.
Should papers with a dark reverse side be used,
these should also be tested for their functionality.
Please pa y attention to the use of infrared reflecting
colors, when acquiring these papers.
Passbooks Passbooks shall be free of any metallic parts such
as staples or metal clips.
Adhesion of any form of stamps or seals is prohib-
ited, as the reliability will be impaired.
Passbooks should not have any pages of a smaller
size than the cover pages.
Passbooks should have no tears, creases, folds or
loose stitched.
Level the pages before use at the time when you
open a folded passbook. Warp of pages will
degrade the reliability.
When you open a folded passbook, curve forms
where the pages are bound in the center of the
passbook. If the curv ed part is too large , such pass-
books may be not used.