TANDBERG 150MXP manual About Call Transfer Blind Call Transfer, Consultative Call Transfer

Call Transfer

TANDBERGTANDBERG15050 MXP MXP 

USERUSERGUIDEGUIDE

About Call Transfer Blind Call Transfer

You may transfer an ongoing call to somebody else in a way similar to what you can do on most corporate telephone systems.

Basically, there are two transfer modes; Blind and Consultative:

•Blind takes place when you receive a call and decides to transfer this call to another person without speaking to that person. In other words, you assume that the other person is present and ready to receive the call.

•Consultative takes place when you put the person you are talking to on hold, then call another person, talk to that person and finally decide to transfer the call to that person.

Alternatively, you may, of course, receive a second call whilst you are in a already. This will, however, impose no change to the above principles.

Whilst in a SIP call, press OK to produce	Press Transfer to initiate the transfer	Call the person to whom the call is to
 the soft keys, if applicable.	 process.	 be transferred in the usual way, either
		by dialling directly or by using the phone
		book. Once you launch the call, transfer
		becomes effective.

!Call transfer works with SIP calls only! You cannot transfer calls between non- SIP participants, nor can you transfer a

SIP call to a non-SIP participant.

Whilst in a call press OK to produce the soft keys, if applicable, and set the current call on hold as described on the previous page.

Consultative Call Transfer

Call the other person, to whom the call is	After you have talked to this person, press
 to be transferred.	 the Transfer key, and the two parties will
	be connected, while you are disconnected.

Table of	Unpacking	&	Operating
Contents	Installation		Principles
D 14067.01
05.2007

Making		Making	Making		Phone Book	Incoming	Calling More	Video Meeting	Contact
Video		Calls Using	Telephone
					Details	Calls	Than One	Features	Information
Calls		Phone Book	Calls

26