TANDBERG Gatekeeper/Border Controller API User Guide
ResourceUsage TotalNonTraversalCalls: <Integer>
Shows the total number of non traversal calls that have been placed on the system. Only present if the system is a Gatekeeper.
ResourceUsage TraversalCalls: <Integer>
Shows the current number of traversal calls on the system.
ResourceUsage MaxTraversalCalls: <Integer>
Shows the maximum number of concurrent traversal calls on the system.
ResourceUsage TotalTraversalCalls: <Integer>
Shows the total number of traversal calls placed on the system.
Gatekeeper
Gatekeeper Alternates Alternate [1..5] [status = <Unknown/Active/Failed>]
Shows the status of the connection to an alternate system.
Gatekeeper Alternates Alternate [1..5] Cause: <String>
Shows an error reason for a failure to connect to the alternate system. Only present if the alternate status if Failed.
Gatekeeper Alternates Alternate [1..5] Address: <String>
Shows the address of the alternate system.
Gatekeeper Alternates Alternate [1..5] Port: <String>
Shows the port of the alternate system.
Calls
Calls Call [1..900] SerialNumber: <String>
Shows the unique serial number of the call.
Calls Call [1..900] State: <Unknown/Connecting/Connected/Disconnected /ConnectionFailed/Parked/Parking/Unparking/ParkFailed>
Shows the state of the call.
Calls Call [1..900] CallType: <Traversal/Direct/Routed>
Shows the type of the call.
Calls Call [1..900] Transferable: <On/Off>
Shows whether this call is capable of being transferred.
Calls Call [1..900] Bandwidth: <Integer>
Shows the bandwidth in kbps for the call.
Calls Call [1..900] Route Zone: <String>
Shows the name of a zone that is part of the route the call takes.
Calls Call [1..900] Route Link: <String>
Shows the name of a link that is part of the route the call takes.
D14172.01 | page 64 of 84 |
