TANDBERG Gatekeeper/Border Controller API User Guide
PerCallIntraMode: <None/Limited/Unlimited>
Determines whether there is a limit on the bandwidth for any one call between two endpoints within this subzone.
PerCallIntra: <1..100000000>
Specifies the bandwidth limit (in kbps) for any one call between two endpoints within this subzone (applies only if Mode is set to Limited).
SubZoneDelete
Deletes a subzone.
SubZoneId(r): <1..100>
The index of the subzone to be deleted.
TransformAdd
Adds a new destination alias transform.
Pattern(r): <S: 1, 60>
Specifies the pattern against which the alias is compared.
Type: <Prefix/Suffix/Regex>
Determines the way in which the string must match the alias. Prefix: the string must
appear at the beginning of the alias. Suffix: the string must appear at the end of the
alias. Regex: the string will be treated as a regular expression.
Behavior: <Strip/Replace>
Determines how the matched part of the alias will be modified. Strip: the matching
prefix or suffix will removed from the alias. Replace: the matching part of the alias will be substituted with the text in the Replace string.
Replace: <S: 1, 60>
(Applies only if pattern behavior is set to Replace.) Specifies the string to be used as a substitution for the part of the alias that matched the pattern.
Priority: <0..65534>
Assigns a priority to the specified transform. Transforms are applied in order of priority, and the priority must be unique for each transform.
TransformDelete
Deletes a transform.
TransformId(r): <1..200>
The index of the transform to be deleted.
TraversalZoneAdd
Adds a new traversal zone.
TraversalZoneName(r): <S: 1, 50> Assigns a name to this traversal zone.
Mode(r): <Assent/H46018>
Determines which H.323 traversal protocol to use, either Assent or H.460.18.
AccountName: <S: 1, 50>
Specifies the account name to be used when connecting to an Assent Traversal Zone.
Gatekeeper1Address: <S: 1, 128>
Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal servers can also be specified.
Gatekeeper1Port: <1..65534>
(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server to connect to.
D14172.01 | page 53 of 84 |
