TANDBERG D14172.01 manual Exercises

TANDBERG Gatekeeper/Border Controller API User Guide

1.6Exercises

The exercises in this section are based on using a TANDBERG Gatekeeper and Microsoft Internet Explorer. Some of the examples may however also apply to other systems and other browsers.

NOTE! Replace the IP address 10.0.0.1 in the below examples with the IP address of your system.

Exercise 1

The example in this exercise shows how to read the supported XML documents from the system using a web browser.

Enter the following address in the browsers address field:

http://10.0.0.1/status.xml

http://10.0.0.1/history.xml

http://10.0.0.1/configuration.xml

http://10.0.0.1/command.xml

http://10.0.0.1/valuespace.xml

Exercise 2

This exercise shows how to use getxml to read the supported XML documents from the system. Enter the following expressions in the browser’s address field.

(NOTE! The first letter in the document names is uppercase):

http://10.0.0.1/getxml?location=Status

http://10.0.0.1/getxml?location=History

http://10.0.0.1/getxml?location=Configuration

http://10.0.0.1/getxml?location=Command

http://10.0.0.1/getxml?location=ValueSpace

Exercise 3

This exercise shows how to use XPath expressions to read subsets of the XML documents.

http://10.0.0.1/getxml?location=Status/SystemUnit

http://10.0.0.1/getxml?location=Configuration/SNMP/SystemContact

http://10.0.0.1/getxml?location=ValueSpace/SNMPCommunityName[@item='1’]

http://10.0.0.1/getxml?location=Configuration/IP//Address

http://10.0.0.1/getxml?location=Command/Dial

D14172.01 page 19 of 84