TANDBERG D14172.01 manual page 54 of

Models: D14172.01

1 84
Download 84 pages 8.98 Kb
Page 54
Image 54
page 54 of 84

TANDBERG Gatekeeper/Border Controller API User Guide

Gatekeeper2Address: <S: 1, 128>

Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal servers can also be specified.

Gatekeeper2Port: <1..65534>

(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server to connect to.

Gatekeeper3Address: <S: 1, 128>

Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal servers can also be specified.

Gatekeeper3Port: <1..65534>

(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server to connect to.

Gatekeeper4Address: <S: 1, 128>

Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal servers can also be specified.

Gatekeeper4Port: <1..65534>

(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server to connect to.

Gatekeeper5Address: <S: 1, 128>

Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal servers can also be specified.

Gatekeeper5Port: <1..65534>

(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server to connect to.

Gatekeeper6Address: <S: 1, 128>

Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal servers can also be specified.

Gatekeeper6Port: <1..65534>

(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server to connect to.

HopCount: <1..255>

Specifies the hop count to be used when sending an alias search request to this zone. Note: If the search request was received from another zone and already has a hop count assigned, the lower of the two values will be used.

Match1Mode: <AlwaysMatch/PatternMatch/Disabled>

Determines if and when a query will be sent to this zone. Always: the zone will always

be queried. Pattern: the zone will only be queried if the alias queried for matches the

corresponding pattern. Disabled: the zone will never be queried.

Match1PatternString: <S: 0, 60>

(Applies only if the Match mode is Pattern Match.) Specifies the pattern against which the alias is compared.

Match1PatternType: <Prefix/Suffix/Regex>

(Applies only if the Match mode is Pattern Match.) Determines the way in which the string must match the alias. Prefix: the string must appear at the beginning of the alias. Suffix: the string must appear at the end of the alias. Regex: the string will be treated as a regular expression.

Match1PatternBehavior: <Strip/Leave/Replace>

(Applies only if the Match mode is Pattern Match.) Determines whether the matched part of the alias should be modified before an LRQ is sent to this zone. Leave: the alias will be unmodified. Strip: the matching prefix or suffix will be removed from the alias. Replace: the matching part of the alias will be substituted with the text in the Replace string.

D14172.01

page 54 of 84

Page 54
Image 54
TANDBERG D14172.01 manual page 54 of