TANDBERG Gatekeeper/Border Controller API User Guide
Bandwidth(r): <1..100000000>
The requested bandwidth of the call (in kbps).
CallType(r): <Traversal/Routed/Direct>
Whether the call type is Traversal, Routed or Direct.
CredentialAdd
Adds an entry to the local authentication database.
CredentialName(r): <S: 1, 25>
Defines the name for this entry in the local authentication database.
CredentialPassword(r): <S: 1, 25>
Defines the password for this entry in the local authentication database.
CredentialDelete
Deletes an entry from the local authentication database.
CredentialId(r): <1..2500>
The index of the credential to be deleted.
DefaultLinksAdd
Restores links between the Default Subzone, Traveral Subzone and the Default Zone.
DefaultValuesSet
Resets system parameters to default values. Level 1 will reset most parameters. There are currently no level 2 parameters, so setting that level has the same effect as setting level 1. Level 3 resets all level 1 and 2 parameters as well as additional parameters. See the Administrator Guide for full details.
Level(r): <1..3>
The level of system parameters to be reset.
DenyListAdd
Adds an entry to the Deny List.
Pattern(r): <S: 1, 60>
Specifies an entry to be added to the Deny List. If one of an endpoint's aliases matches one of the patterns in the Deny List, the registration will not be permitted.
DenyListDelete
Deletes an entry from the Deny List.
DenyListId(r): <1..2500>
The index of the entry to be deleted.
Dial
Places a call between two endpoints.
callSrc(r): <S: 1, 60>
The alias of the first endpoint to be placed in the call.
callDst(r): <S: 1, 60>
The alias of the second endpoint to be placed in the call.
Bandwidth: <1..100000000>
The requested bandwidth of the call (in kbps).
EncryptionMode: <Auto/On/Off>
Specifies whether the call will be encrypted.
D14172.01 | page 49 of 84 |
