TANDBERG T3 - page 16

PAGE 16/58

119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08

TANDBERG

Telepresence T3

4. Unpack the center system. Dismount the top screw and the cable hatch

cover on both sides of the module.

5. In addition, disconnect and put away the following cables:

•112083 Ethernet Cable

•112980 Power Cable (main in)

•115233 PC Connection Cable (Video/audio in)

•117083 Main Speaker Cable (top of ampliﬁer)

•117087 Monitor Control Cable (USB-DSUB)

•118315 External Microphone Cable

note! The 117084 Audio RCA Cable (Codec to ampliﬁer) shall be retained for the

Center module. do not remove this cable!

6. Mount the Center bottom module to the ﬂoor structure.

bottom modulEs

4 × nut (b) M8

note! Screws and cable hatch covers

must be removed before the next

module is mounted.

Contents

Main imPortAnt informAtion rEGArdinG room dimEnsions TANDBERG Telepresence T3 systEm AssEmbly GuidE ContEnts Page Telepresence T3 Page CEilinG liGht liGht mountinG dEtAils Telepresence T3 Door Page Page Page Page Page Page Page Page Telepresence T3 Page PAGE 20/58 CAblE bundlinG struCturE in floor Page Page Page Page 119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08 1 5. Carefully slide the camera into place. 5HD-SDI mountinG thE CAmErA mountinG thE CAmErA 119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08 Saturn C70 Unit Make sure all snaps and magnet points are securely xed. Camera cable goes inside the channel CAblE ConnECtion dEtAils systEm ConnECtions Page PAGE 31/58 CAblE bundlinG in thE systEms PAGE 30/58 CAblE bundlinG in thE systEms Page Page Page Page Telepresence T3 Page Page tAblE CAblinG struCturE KEEP siGnAl And PoWEr CAblEs APArt Page PAGE 43/58 PAGE 42/58 PAGE 45/58 tAblE CAblE lEft systEm ConnECtions Page Page tAblE ConnECtion notEs null-modEm rEquirEmEnt Audio CAblE ConnECtions Page Page mountinG thE CollAborAtion sCrEEns