TANDBERG | Mounting the |
Telepresence T3 | collaboration screens |
24 × screw (c)
Note! The table must have all cables mounted before the presentation screens are installed.
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
1.Unpack the box marked with ’T3 Telepresence kit w/ TCU & screens’ where the following items are found:
3× Touch Collaboration Display (22”) with power supply
3× Table Quick Buttons with power supply and cable kit
6× Cable Well Assemblies
2.Fasten the monitors to the monitor brackets using 8 c screws for each moni- tor. Switch on the monitors.
3.Fasten screws (c) in the opening of the table as shown below.
PAGE 49/58
