TANDBERG | Mounting the Monitor |
Telepresence T3 | Assemblies |
119078.01 TELEPRESENCE T3 SYSTEM ASSEMBLY 12.08
1.Before you start mounting the monitors, the following cables must be con- nected:
Cable 117850 to the left DNAM Cable 117852 to the center DNAM Cable 117856 to the right DNAM
Space is too tight to permit a convenient cable connection after the monitor has been mounted.
2.Unpack the monitor assembly and lift onto the bottom module. It requires a minimum of four persons to lift the assembly, using the attached straps and gloves. Make sure you hold the monitor level, otherwise one of the straps may slip.
PAGE 23/58
