37
Configuration commands Description
xConfiguration HTTPS Mode: <On/Off> Enables/disables HTTPS support. Note that HTTP must also
be enabled.
You must restart the system for changes to take effect.
xConfiguration IP Address: <IPAddr> Specify the IP address of the system.
You must restart the system for changes to take effect.
xConfiguration IP Gateway: <IPAddr> Specify the IP gateway of the system.
You must restart the system for changes to take effect.
xConfiguration IP SubnetMask: <IPAddr> Specify the IP subnet mask of the system.
You must restart the system for changes to take effect.
xConfiguration LDAP Encryption:
<Off/TLS> Sets the encryption mode to be used on the connection to the
LDAP server.
The default is Off.
xConfiguration LDAP Password:
<password> Sets the password to be used when binding to the LDAP
server.
xConfiguration LDAP Server Address:
<IPAddr> Sets the IP address of the LDAP server to be used when
making LDAP queries.
xConfiguration LDAP Server Port:
<1..65534> Sets the IP port of the LDAP server to be used when making
LDAP queries.
xConfiguration LDAP UserDN: <userdn> Sets the user DN to be used when binding to the LDAP server.
xConfiguration Links Link [1..100]
Name: <linkname> Specifies the name of a link in the list of links.
xConfiguration Links Link [1..100]
Node1 Name: <nodename> Specifes the first node of a link.
A node name may be either a Zone name or a SubZone name.
xConfiguration Links Link [1..100]
Node2 Name: <nodename> Specifes the second node of a link.
A node name may be either a Zone name or a SubZone name.
xConfiguration Links Link [1..100]
Pipe1 Name: <pipename> First pipe associated with a link.
xConfiguration Links Link [1..100]
Pipe2 Name: <pipename> Second pipe associated with a link.
xConfiguration Links TraversalLink
Pipe1 Name: <pipename> First pipe associated with the traversal link.
xConfiguration Links TraversalLink
Pipe2 Name: <pipename> Second pipe associated with the traversal link.
xConfiguration NTP Address: <IPAddr> Sets the IP address of the NTP server to be used when
synchronizing system time.
xConfiguration Option [1..64] Key:
<optionkey> Specify the option key of your software options.
The following command
xstatus system software configuration
can be used to query the existing options enabled.
You must restart the system for changes to take effect.