Tandberg Data N3 - page 44

TANDBERG Gatekeeper User Manual

38

Configuration commands Description

xConfiguration Pipes Pipe [1..100]

Bandwidth Total Limit: <1..100000000> Bandwidth associated with a pipe, keyed by index.

xConfiguration Pipes Pipe [1..100]

Bandwidth Total Mode:

<None/Limited/Unlimited>

Whether or not a given pipe is enforcing total bandwidth

restrictions. None corresponds to no bandwidth available.

xConfiguration Pipes Pipe [1..100]

Bandwidth PerCall Limit: <1..100000000>

Per call bandwidth of a pipe.

xConfiguration Pipes Pipe [1..100]

Bandwidth PerCall Mode:

<None/Limited/Unlimited>

Whether or not a given pipe is enforcing per-call bandwidth

restrictions. None corresponds to no bandwidth available.

xConfiguration Pipes Pipe [1..100]

Name: <pipename> Name for a pipe.

xConfiguration SNMP CommunityName:

<name> SNMP Community names are used to authenticate SNMP

requests. SNMP requests must have this `password' in order to

receive a response from the SNMP agent in the Gatekeeper.

You must restart the system for changes to take effect.

xConfiguration SNMP Mode: <On/Off> Turn on/off SNMP support.

You must restart the system for changes to take effect.

xConfiguration SNMP SystemContact:

<name> Used to identify the system contact via SNMP tools such as

TANDBERG Management Suite or HPOpenView.

You must restart the system for changes to take effect.

xConfiguration SNMP SystemLocation:

<name> Used to identify the system location via SNMP tools such as

TANDBERG Management Suite or HPOpenView.

You must restart the system for changes to take effect.

xConfiguration SSH Mode: <On/Off> Enables/disables SSH and SCP support.

You must restart the system for changes to take effect.

xConfiguration SubZones DefaultSubZone

Bandwidth PerCall Limit: <1..100000000>

Per call bandwidth of the default subzone.

xConfiguration SubZones DefaultSubZone

Bandwidth PerCall Mode:

<None/Limited/Unlimited>

Whether or not the default subzone is enforcing total bandwidth

restrictions. None corresponds to no bandwidth available.

xConfiguration SubZones DefaultSubZone

Bandwidth Total Limit: <1..100000000> Total bandwidth available on the default subzone.

xConfiguration SubZones DefaultSubZone

Bandwidth Total Mode:

<None/Limited/Unlimited>

Whether or not the default subzone is enforcing per-call

bandwidth restrictions. None corresponds to no bandwidth

available.

xConfiguration SubZones

TraversalSubZone Bandwidth PerCall

Limit: <1..100000000>

Per-call bandwidth available on the traversal subzone.

xConfiguration SubZones

TraversalSubZone Bandwidth PerCall

Mode: <None/Limited/Unlimited>

Whether or not the traversal subzone is enforcing per-call

bandwidth restrictions. None corresponds to no bandwidth

available.

xConfiguration SubZones

TraversalSubZone Bandwidth Total Limit:

<1..100000000>

Total bandwidth available on the traversal subzone.

Contents

Main Trademarks and copyright Environmental Issues TANDBERGs Environmental Policy Environmental Considerations Operator Safety Summary Table Of Contents Page 1 Introduction Page 2 Installation 2.1 Unpacking 2.2 Mounting 2.3 Connecting Cables 2.4 Switching on the System 2.5 Gatekeeper Initial Configuration Page 3 Using the Gatekeeper 3.1 System Administration 3.2 Registration 3.3 Neighbor Gatekeepers 3.4 Alternate Gatekeepers Page 3.5 Call Control Page Page 3.6 Bandwidth Control IP Page 3.6.1 Bandwidth Control and Firewall Traversal 3.6.2 Bandwidth Control Examples Enterprise Branch Office Home Office Home sub-zone Page 3.7 Registration Control 3.7.1 Registration Restriction Policy 3.7.2 Authentication 3.8 H.235 Authentication 3.8.1 Authentication using a local database 3.8.2 Authentication using an LDAP server Securing the LDAP connection with TLS 3.9 URI Dialing 3.9.1 URI Dialing and firewall traversal 3.9.2 Creating DNS SRV records 3.10 Firewall traversal 3.10.1 Calling unregistered endpoints 3.11 Call Policy 3.11.1 Making Decisions Based on Addresses address-switch address otherwise not-present 3.11.2 CPL Script Actions location proxy reject Selective Call Screening 3.11.3 Unsupported CPL Elements 3.11.4 CPL Examples Call screening Call Redirection 4 Software Upgrade 4.1 Upgrading Using HTTP(S) 4.2 Upgrading Using SCP Page 5 Configuring the Gatekeeper 5.1 Status xstatus ? xstatus TANDBERG Gatekeeper User Manual 5.2 Configuration xconfiguration ? xconfiguration xconfiguration <name> xconfiguration <name> ? xconfiguration <name> <param1>: value1 <param2>: value2 Page Page Page Page TANDBERG Gatekeeper User Manual 40 Configuration commands Description 5.3 Command xcommand ? To get usage information for a specific command, type xcommand <commandname> ? Command Usage Description Page 5.4 History xhistory ? xhistory xhistory <name> 5.5 Feedback 5.6 Other commands Page 6 Appendix: Configuring DNS Servers 6.1 Microsoft DNS Server 6.2 BIND 8 & 9 6.3 Verifying the SRV record 7 Appendix: Configuring LDAP Servers 7.1 Microsoft Active Directory 7.1.1 Prerequisites 7.1.2 Adding H.350 objects Create the organizational hierarchy Add the H.350 objects 7.2 OpenLDAP 7.2.1 Prerequisites 7.2.2 Installing the H.350 schemas 7.2.3 Adding H.350 objects Create the organizational hierarchy Add the H.350 objects 7.2.4 Securing with TLS 8 Approvals EMC Emission - Radiated Electromagnetic Interference EMC Immunity Electrical Safety 9 Technical Specifications 10 Index