Tascam 2488MKII Stereo dynamics processor, Single effect

Appendix

Stereo dynamics processor

The dynamics processor inserted at the stereo master bus can be either a compressor or an expander. Use MIDI channel 9 to control this processor.

Effect	NRPN	Parameter	Values
	00 00	Threshold	0	– 32 = –32 – 0 dB
	00 01	Ratio	0	– 14 = 1.0:1, 1.1:1, 1.3:1, 1.5:1, 1.7:1, 2.0:1, 2.5:1, 3.0:1, 3.5:1, 4.0:1,
			5.0:1, 6.0:1, 8.0:1, 16:1, ∞:1,
Compressor (CMP)	00 02	Attack	1	– 100	= 2 – 200 (msec)
	00 03	Release	1	– 100	= 10 – 1000 (msec)
	00 04	Post Gain	0	– 32 = 0 – 32 (dB)
	00 05	Switch	0, 1 = Off, On
	00 00	Threshold	0	– 32 = -32 – 0 dB
	00 01	Ratio	0	– 14 = 1:1.0, 1:1.1, 1:1.3, 1:1.5, 1:1.7, 1:2.0, 1:2.5, 1:3.0, 1:3.5, 1:4.0,
			1:5.0, 1:6.0, 1:8.0, 1:16, 1:32,
Expander (EXP)	00 02	Attack	1	– 100	= 2 – 200 (msec)
	00 03	Release	1	– 100	= 10 – 1000 (msec)
	00 04	(reserved)
	00 05	Switch	0, 1 = Off, On

Single effect

Use MIDI channel 10 to control this processor. The single processor can use any one of a number of effect types: reverb, delay, chorus, pitch shifter,flanger, phaser and gated reverb.

Effect	NRPN	Parameter	Values
	00 00	Room Type	0	– 3 = Hall, Room, Live, Studio
	00 01	Pre Delay	0	– 250 = 0 – 250 (msec)
Reverb (REV)	00 02	Rev Time	1	– 100 = 0.1 – 10.0 (sec)
	00 08	Diffusion	0	– 100 = 0 – 100
	00 04	Level	0	– 127 = 0 – 127
	00 00	Type	0	– 2 = Normal, Pan, Multi
	00 01	Pre Delay	0	– 1000 = 0 – 1000 (msec)
Delay (DLY)	00 02	FB Delay	0	– 1000 = 0 – 1000 (msec)
	00 03	Feedback	0	– 100 = 0 – 100
	00 04	Level	0	– 127 = 0 – 127
	00 00	Rate	1	– 100 = 0.1 – 10.0 (Hz)
	00 01	Depth	0	– 100 = 0 – 100
Chorus (CHO)	00 02	FB Delay	0	– 100 = 0 – 100
	00 03	Feedback	0	– 100 = 0 – 100
	00 04	Level	0	– 127 = 0 – 127

TASCAM 2488MKII 101