7 − Recorder

SILENCE

This function is equivalent to recording silence between the IN and OUT points on the chosen track or tracks.

IN OUT

There is only one value that you can change:

Src. Trk Select an individual track (1 through 8), a pair of tracks (1/2, 3/4, 5/6, etc.), or all the tracks (1-24).

Press YES/ENTER to perform the operation or NO/EXIT to leave this screen.

IN OUT

No material is added or deleted, and the length of the result is therefore the same as that of the original.

CLONE TRACK

This copies a track or pair of tracks to another track or pair of tracks. The IN and OUT points do not have any meaning here.

There are two values that you can change:

Src. Trk Select an individual track (1 through 24), or a pair of tracks (1/2, 3/4, 5/6, etc.) or the MASTER stereo track.

Dst. Trk This sets the destination track or tracks to which the source track is cloned. What you can select here depends on what you have selected for the source track. If you have selected a single track, you can select tracks 1 through 24 here. If you have selected a pair of tracks (for instance, 1/2 or MASTER), you can only select track pairs (1/2, 3/4, etc.) here.

Press YES/ENTER to perform the operation or NO/EXIT to leave this screen.

If you try to select the same track as a destination that you have selected as the source, when you press the YES/ ENTER key, a pop-up message will appear.

Redo the operation with a different set of tracks.

CLEAN OUT

This deletes all the audio material in the selected track or tracks.

There is only one value that you can change:

Src. Trk Selects the tracks for erasing the audio data. You can select a single track (1 through 24), a pair of tracks (1/2, 3/4, etc.), all the tracks (1-24) or virtual tracks that have not been assigned to physical tracks (Vtrack).

Press YES/ENTER to perform the operation or NO/EXIT to leave this screen.

The IN and OUT points do not have any meaning here.

TASCAM 2488MKII 63