7 − Recorder

MOVE ® INSERT

This function takes the section of a track or tracks marked by the IN and OUT points, and moves it to the chosen track or tracks, inserting it as new material, starting at the TO point.

IN OUT TO

You can change the following values:

Src. Trk This sets the source track or tracks from which the section is taken. Choose 1 through 24 to select an individual track. Choose 1/2, 3/4, 5/6, etc. to select a pair of tracks. Choose 1-24 to select all tracks.

IN OUT TO

After the operation, the selected section of the source between the IN and OUT points is replaced by silence.

The insert operation adds the selected section as new material to the destination. Nothing is overwritten on the desti- nation, as any material following the TO point is moved to the end of the newly-inserted section. The destination is therefore longer than it was before the operation.

Dst. Trk This sets the destination track or tracks into which the selected section is inserted. What you can select here depends on what you have selected for the source track. If you have selected a single track, you can select tracks 1 through 24 here. If you have selected a pair of tracks (for instance, 1/2), you can only select track pairs here. If you have selected all tracks (1-24), then this is the only option available to you here.

Press YES/ENTER to perform the operation or NO/EXIT to leave this screen.

OPEN

This function “opens up” a silent gap between the IN and OUT points on the chosen track or tracks.

IN OUT

IN OUT

The source and destination are the same, and after the operation, the track is split at the IN point, with the material which followed the IN point now moved to follow the OUT point. The result is therefore longer than the original.

There is only one value that you can change:

Src. Trk Select an individual track (1 through 24), a pair of tracks (1/2, 3/4, etc.), all of the tracks (1-24) or all the virtual tracks (ALL).

Press YES/ENTER to perform the operation or NO/EXIT to leave this screen.

CUT

In this operation the audio material after the OUT point is moved forward to the IN point.

IN OUT

IN

The source and destination are the same, and after the operation, the material which followed the OUT point now moved to follow the IN point. Material which was between the IN and OUT points is deleted. The result is therefore shorter than the original.

There is only one value that you can change:

Src. Trk Select an individual track (1 through 24), a pair of tracks (1/2, 3/4, etc.), all of the tracks (1-24) or all the virtual tracks (ALL).

Press YES/ENTER to perform the operation or NO/EXIT to leave this screen.

62 TASCAM 2488MKII