Tascam 2488MKII MIDI Program Change messages, ªScene memory Program Change messages, NRPN, Effect, Effect, Values, chain #, Parameter, Mic effects (user), Multi effect (user)

Appendix

Effect	Effect	NRPN	Parameter	Values
chain #
		00 15	Attack	1	– 100 = 0.1 – 10.0 (Hz)
		00 16	Sense	0	– 100 = 0 – 100
4	Wah (WAH)	00 17	(reserved)
		00 18	(reserved)
		00 19	Switch	0, 1 = Off, On
		00 20	Time	0	– 1000 = 0 - 1000 (ms)
		00 21	Feedback	0	– 100 = 0 – 100
		00 22	Hi Damp	0	– 100 = 0 – 100
		00 23	Mix Level	0	– 100 = 0 – 100
5	Delay (DLY)	00 24	Type	0	– 6 = OFF, Normal. Pan, Stereo, FB Mod, Gate, Reverse
		00 20	Time-L	0	– 1000 (ms) *If type is Stereo only
		00 26	Time-R	0	– 1000 = 0 – 1000 (ms) *If type is Stereo only
		00 21	Feedback-L	0	– 100 = 0 – 100 *If type is Stereo only
		00 27	Feedback-R	0	– 100 = 0 – 100 *If type is Stereo only
		00 28	Threshold	0	– 100 = 0 – 100 *If type is Gate only

MIDI Program Change messages

The 2488MKII can accept Program Change messages to select an effect and to change scenes. Before a Program Change message is sent for changing an effect, a Bank Select message must be sent to select whether an effect will be selected from the preset bank or from the user bank of memories. In each case, bank 0 corresponds to the preset memories, and bank 1 to the user bank.

Send the Bank Select messages (CC 0) on MIDI channels

1 through 8 for mic effects (see below), MIDI channel 9 for stereo dynamics, channel 10 for the single effect, and channel 11 for the multi effect.

When selecting a mic effect, a Bank Select message should first be sent on channel 14 to select the group of eight channels or inputs out of which the channel is selected:

Bank 0: Mixer channels 1 though 8

Bank 1: Mixer channels 9 through 16

Bank 2: Mixer channels 17 through 24

Bank 3: Inputs A through H

The Program Change messages that are then valid are as follows (see the tables following for details of the preset values—the “user” messages correspond to the entry number in the library):

Mic effects (preset) Program Change 0 to 3

Mic effects (user) Program Change 0 to 99 (maximum) Stereo dynamics effect (preset) Program Change 0 to 1

Stereo dynamics effect (user) Program Change 0 to 99 (maximum)

Single effect (preset) Program Change 0 to 6

Single effect (user) Program Change 0 to 99 (maximum) Multi effect (preset) Program Change 0 to 31 Multi effect (user) Program Change 0 to 99 (maximum)

ªScene memory Program Change messages

These are transmitted on channel 16. The Program Change message may be from 0 to 99.

TASCAM 2488MKII 105