8 − Mastering and CD recorder

Finalizing the disc

When you have recorded the last CD track on a disc, you must finalize it to make it playable on ordinary CD players. Before finalizing, you can check the recorded CD tracks using the 2488MKII’s CD PLAYER function.

The CD-RW drive must contain an unfinalized disc before you start the process.

1Make sure the 2488MKII is in “normal” mode (not master check or pre-mastering mode). On the AUDIO CD menu, move the cursor to FINALIZE and press YES/ENTER.

2A pop-up screen asks if you are sure. Press YES/ENTER to continue, NO/EXIT to stop the finalize process.

If you continue, the CD session is closed and the finalizing material (Table of Contents or TOC) is written to the disc.

NOTE

You cannot add CD tracks to a finalized disc. You can only finalize a disc once, and you cannot unfi- nalize a disc.

During finalizing, the CD-RW drive’s eject button cannot be used.

Creating an audio CD using DAO

When recording multiple CD tracks at once, you can set the order in which the tracks are recorded.

Once a CD has been made in this way, no further tracks can be added, as the CD is automatically finalized at the end of the operation.

1Insert a blank CD-R/CD-RW disc in the CD- RW drive before starting the following procedures.

2With the 2488MKII stopped in a “normal” mode (not master check or pre-mastering mode), choose CD WRITER from the AUDIO CD menu, and press the YES/ENTER key.

The 2488MKII checks the disc. After verifying that the disc is recordable, a list of the pre-mastered songs on the current partition appears on screen.

NOTE

If a song has been recorded, but has not been mastered, it will not appear in the list.

If you have a song in another partition which you want to add to the list in the current partition, you should copy it from the old partition to the current partition (see “Copying songs” on page 46).

3Use the dial to scroll through the list of songs, and when you highlight a song that you wish to add to the final CD, press the INSERT key.

A check mark appears by the title of every selected song. There is no need to worry about the final running order of the CD at this stage.

4If you have made a mistake in adding a song to the list, you can remove it by highlighting the title and pressing the DELETE key.

5When you have added all the songs to the list that you want to record on the CD, press YES/ENTER.

NOTE

If you have only selected one song, the procedure from now is as if you had highlighted the song and pressed YES/ENTER, as described above. Read that section, and ignore the remainder of this section.

The screen changes to the song order screen (if you want to return to the song selection screen, press NO/EXIT).

6Use the dial to scroll through the list of songs.

7When a song title is highlighted, use the § and keys to move it up and down in the list. As the song is moved up and down in the list it remains highlighted.

Select further songs for rearrangement using the dial.8Repeat procedures 6 and 7 as necessary.9When you have completed the running order, press YES/ENTER.

The screen changes to the “gap setting” screen. This allows you to set the gap between tracks on the CD (press NO/EXIT to return to the song order screen).

72 TASCAM 2488MKII