Tascam 2488MKII Checking assignments, Breaking assignments, Saving and loading assignments (QUICK ROUTING), Press, Use the dial (or

5 − Mixer

Checking assignments

When either an input key (or channel SELECT key) is pressed and held down it flashes, together with the channel (or input key) to which it has been assigned. Also, if the SHIFT key is pressed, followed by the MAP key, a screen is shown with the current assignments.

The eight inputs are represented by horizontal lines, which are joined to the channel labels at the bottom of the screen by vertical lines when they are assigned to the channels.

Use the Ó/Á cursor keys to change between viewing channels 1 through 12, and 13 through 24.

Breaking assignments

If an input or channel SELECT key is held down, the assigned CHANNEL (or INPUT) key flashes. Press the other key to break the assignment.

NOTE

way as for single channels. Pressing one SELECT key of a linked channel pair is typically the same as pressing both together.

Assigning and unassigning linked channels (see “Link- ing channels” on page 33) works in much the same

Saving and loading assignments (QUICK ROUTING)

Recording, bounce, and mixdown routing assignment settings can all be saved for easy setup to match your recording system and environment.

1Press the QUICK ROUTING key to bring up the screen shown here.

2Use the dial (or §/¶ cursor keys) to select the settings to be loaded, or the destination for the current routing assignment settings.

3Use the Ó/Á cursor keys to select LOAD or SAVE.

4Press YES/ENTER. The routing assignments are either stored or loaded. The home screen briefly shows Save routingor Load routing.

NOTE

When bounce routing settings (BOUNCE) are loaded, 2488MKII automatically enters bounce mode.

30 TASCAM 2488MKII