Appendix

 

 

 

 

 

 

 

 

No.

Message

Meaning

Action

 

No tracks have

Before an auto-punch operation, you must have

Press NO/EXIT and press the REC key of at

 

been armed. Arm

at least one armed track.

least one track on which you will be recording

18

at least one

 

(once a track has been armed in auto-punch,

track.

 

the track arming status cannot be changed).

 

Press [EXIT].

 

 

 

Non-linear

Digital audio input mode has been selected,

Press NO/EXIT and check the digital audio

 

audio detected.

but the 2488MKII has detected the wrong data

source. The 2488MKII expects a signal in

19

Check your

format for the incoming digital audio to be used.

S/PDIF (IEC60958 Consumer use) format at

 

system set-up

 

44.1 kHz. It cannot accept compressed audio

 

 

 

formats, etc.

 

Press [EXIT].

 

 

 

Not enough free

Copying a song has failed because there is not

Press NO/EXIT and use one of the SONG

 

disk space. Use

enough space on the selected or target partition.

menu operations such as DELETE UNUSED or

20

DELETE UNUSED

 

ERASE to free up some space on the partition

to make space.

 

where there is not enough space (these opera-

 

 

 

tions cannot be undone).

 

Press [EXIT].

 

 

 

Not enough free

Sometimes after repeated operations, the inter-

Press NO/EXIT. Use the DELETE UNUSED

 

memory. Use

nal memory of the 2488MKII becomes used,

menu item from the SONG menu. As well as

21

DELETE UNUSED

and recording, etc. is not possible.

deleting the unused song data, this action

to free memory.

 

will also free up memory, so recording can

 

 

 

continue. Remember that this operation

 

Press [EXIT].

 

cannot be undone.

 

Not enough room on

Too much data has been selected to fit onto the

Press YES/ENTER to change the CD for

 

CD for burn. Use

CD that is currently loaded.

another one, or NO/EXIT to cancel the current

22

another CD [YES]

 

operation. Use a higher-capacity disc when

 

or cancel [NO].

 

burning a master track or exporting data, or

 

 

 

one of the same capacity as the current disc

 

 

 

when backing up.

 

Not enough room

No enough space on the hard disk to create the

Press NO/EXIT and create space by deleting

 

on hard disk for

image file necessary to create a CD.

songs, etc., (SONG->ERASE) backing them up

23

this operation.

 

if necessary (this operation cannot be undone).

 

 

 

You can free up space on a partition other than

 

Press [EXIT].

 

the current partition (use the DISK->SELECT

 

 

 

function) in order to create space for the image.

 

Protected song.

Recording, track editing, recording, titling, etc.

Press NO/EXIT, and use the PROTECT menu

 

Unprotect with

cannot be carried out when the current song

item from the SONG menu to remove the

24

SONG PROTECT.

has been protected.

protection from the song before proceeding.

 

Press [EXIT].

 

 

 

Repeat mode is

Because repeat mode is selected, the following

Press NO/EXIT and cancel the repeat mode

 

selected.

functions cannot take place: locate operation,

(REPEAT key) before proceeding with the

25

Cannot do this

track editing, undo/redo, auto punch, quick

operation that produced this message.

 

operation now.

routing, all menu operations, and shutdown.

 

 

Press [EXIT].

 

 

 

SSA mode is

Because SSA mode is selected, the following

Press NO/EXIT and cancel the SSA mode

 

selected.

functions cannot take place: MTC slave opera-

(PITCH/SSA key) before proceeding with the

26

Cannot do this

tions, jog and trim functions, recording (includ-

operation that produced this message.

operation now.

ing auto-punch) and digital input.

 

 

Press [EXIT].

 

 

TASCAM 2488MKII 113