Manuals / Brands / Home Audio / CD Player / Tascam / Home Audio / CD Player

Tascam BB-1000CD Recording on a disc, Press the, Press the, Press the, Pressing the, Pressing the, key again. The, key again. The, key lights steadily, key lights steadily

1 56

Download 56 pages, 4.68 Mb

3.Press the REC/READY [º] key to start recording. The REC/READY [º] key lights during recording.

4.Recording stops when pressing the STOP key during recording or recording-on-standby. The REC/READY [º] key goes off.

•Pressing the REC/READY [º] key during recording returns the unit on standby for recording. The REC/ READY key flashes during recording-on-standby.

Recording on a new track starts as you press the

REC/READY [º] key again. The REC/READY [º] key lights steadily.

NOTE

You can play the last recorded ﬁle if you press the PLAY/READY

[¥/π] key directly after stopping recording by pressing the STOP key.

Recording on a disc

Before recording, load a CD-R or CD-RW into the unit and press the CD key to change the recording media to CD.

CAUTION

You cannot record on a disc when using the unit with battery power. Supply the power through the AC adapter.

1.Press the REC/READY [º] key.

The unit becomes on standby for recording. The Record screen appears and REC/READY [º] key flashes.

2–Quick start guide

2.Check the level meter and adjust the input level by turning the FRONT MIC/EXT MIC knob and the REAR MIC/LINE knob.

The input level is indicated on the L/R meter.

The indicators upper left of the knobs light when the input is too loud. Set the input level a little less than that makes the indicators lit at inputting maximum volume.

3.Press the REC/READY [º] key to start recording. The REC/READY [º] key lights during recording.

4.Recording stops when pressing the STOP key during recording or recording-on-standby. The REC/READY [º] key goes off.

•Pressing the REC/READY [º] key during recording returns the unit on standby for recording. The REC/ READY key flashes during recording-on-standby.

Recording on a new track starts as you press the

REC/READY [º] key again. The REC/READY [º] key lights steadily.

NOTE

You can play the last recorded track if you press the PLAY/READY [¥/π] key directly after stopping recording by pressing the STOP key.

CAUTION

To playback a disc recorded on the unit on another device, you need to ﬁnalize it.

TASCAM BB-1000CD 21

Contents

OWNER'S MANUAL WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Page Cautions about Batteries CAUTION •DO NOT REMOVE THE PROTECTIVE HOUSING USING A SCREWDRIVER Playback What types of files can this unit play back To select files to play back on an SD card Recording What disc is recordable What is finalization To record in higher sound quality To record for a longer period of time To record sounds all around the unit by using the front and rear microphones To record sound using the front microphones only To record the sound of a tape recorder or record player Settings for flexible recording Assisting practice of an instrument Overdubbing on a playback sound Editing an audio file Copying music files Other useful functions 1–Introduction 2-Quickstart guide 3–PartNames and Functions 4–Preparation 9–Forpracticing musical instruments 12–Environmentalsettings 14–Troubleshooting Main features Included items Note about this manual Trademarks, copyrights, and disclaimers Precautions for use Cautions About CD-Rand CD-RWdiscs Preparation Powering the unit Connecting the AC adapter Installing the batteries Turning the power on and off Loading a disc Playing back Selecting the playback media Inserting an SD card Recording on an SD card Recording on a disc Recordable discs: Top panel Page Front Panel Rear Panel Left side panel Right side panel Remote control unit (RC-BB1000) Connecting the AC adapter Installing the batteries Installing the battery Battery replacement Precautions concerning batteries Precautions using the remote control unit Write protection Removing the SD card When using a new SD card Ejecting a disc Home screen Setting screen structure Operation basics Operation example Setting screen list Connecting to the EXT MIC jacks Connecting to the LINE IN jack Skipping a track a little backward (FLASH BACK) Playback from marked points Repeat playback Loop playback (I–OLOOP) Selecting the input Adjusting the input settings Adjusting the balance of microphones Adjusting the level of playback signal Preparation for overdubbing Overdub recording Preparation Chromatic tuner mode Oscillator mode Setting the metronome Starting and stopping the metronome Changing the playback key Practicing a certain phrase repeatedly Changing the playback speed Reducing sound of a certain location (PART CANCEL) Copying a CD onto an SD card Writing files on an SD card onto a disc Backing up an audio CD Auto recording Long time recording About the recording time Editing a file 2.Press the CURSOR [§/¶/˙/¥] key to select EDIT and press the ENTER key A pop-upwindow appears as below 4.Select an operation you want to apply to the selected file Finalizing a disc 2.Press the CURSOR [§/¶] key to select MEDIA and press the ENTER key The MEDIA CD screen appears 3.Press the CURSOR [§/¶] key to select FINALIZE and press the ENTER key The confirmation message appears Icons on the BROWSE screen File operations Screen navigation Folder operations To open the SET UP screen 1. Press the MENU key to open the MENU screen 2. Press the CURSOR [§/¶] key to select SET UP and press the ENTER key Backlight Auto OFF setting Adjust the display contrast Messages Meaning and remedy Page No power Remote control doesn't work No sound The sound to record hears distorted The sound is noisy CD recorder Dimensions