3–Part Names and Functions

yOVERDUB key

Press this key when recording a mixed sound of CD/SD playback and other input signals (overdubbing).

The unit becomes on standby for overdubbing by pressing the key and the key lights during on standby.

uREC/READY [º] key

Press this key to make the unit on standby for recording. The key is flashing while on standby. The key lights during recording.

During recording, press this key to make the unit on standby for recording.

iF1 key

This key works variously depending on the status of the unit; confirming of the selection, returning to the previous step. etc. The function of the F1 key is indicated on left bottom of the display.

oHOME key

Press this key to return to the Home screen while displaying another screen.

pMENU key

When the Home screen is displayed, press this key to open the menu list (MENU screen).

When a setting screen is displayed, press this key to return to the MENU screen.

hPLAY/READY [Á/π] key

When the Home screen is displayed and playback is stopped, press this key to start playback.

During playback, press this key to pause it.

jFLASH BACK key

Press this key to skip a few seconds back the track during playback (or pause). You can adjust the skip

back time at the SET UP screen (page 36 “Skipping a track a little backward (FLASH BACK)”).

kTUNER key

Press this key to open the TUNER screen. You can use

the unit as a chromatic tuner for instrument (page 41 “Chromatic tuner mode”).

When the TUNER screen is displayed, press this key to return to the Home screen.

lLOOP key

Use this key to activate/deactivate the loop playback when the start point and end point of playback has been set (page 37 "Loop playback (I–O LOOP)”).

Use this key to activate/deactivate repeat playback

when the points are not set (page 37 “Repeat playback” ).

Press IN/OUT/MARK key while pressing and holding this key to clear the start/end/marker point, respectively.

aF2 Key

This key works variously depending on the status of the unit; confirming of the selection, returning to the previous step. etc. The function of the F2 key is indicated on right bottom of the display.

sCURSOR [§//˙/¥] key

Press this key to move the cursor (highlighted area) on a setting screen.

dSTOP key

Press this key to stop playback. The track returns to its beginning.

fÂ/Ô key

Press this key within 1 seconds from the beginning of a track to skip to the beginning of the previous track. Pressing it at more than 1 seconds after the beginning of a track skips to the beginning of the current track. Press and hold this key to fast-reverse the tracks.

Pressing this key during loop playback slides the end point of the loop back to its start point, keeping the time length of the loop.

g¯/key

Press this key to skip to the next track.

Press and hold this key to fast-forward the tracks.

Pressing this key during loop playback slides the start point of the loop forward to its end point, keeping the time length of the loop.

;IN key

Use this key to set the start point of the loop playback. Press this key while pressing and holding the LOOP key

to clear the start point (page 37 "Loop playback (I–O LOOP)”).

zOUT key

Use this key to set the end point of the loop playback. Press this key while pressing and holding the LOOP key

to clear the end point (page 37 "Loop playback (I–O LOOP)”).

x MARK key

Use this key to set the marker point where playback starts. Press this key while pressing and holding the LOOP key to clear the marker point on the Home screen. (page 36 “Playback from marked point”).

24 TASCAM BB-1000CD