Manuals / Brands / Home Audio / CD Player / Tascam / Home Audio / CD Player

Tascam BB-1000CD Connecting to the EXT MIC jacks, Connecting to the LINE IN jack, Connecting monitors, Connecting external microphones and an audio device

1 56

Download 56 pages, 4.68 Mb

Connecting monitors

You can connect headphones to the PHONES jack (stereo mini jack) and an external audio device (powered speak- ers, audio system, etc) to the LINE OUT jack (RCA jack) for monitoring.

Powered speakers, stereo system, etc.

Headphones

NOTE

Slide the SPEAKER switch to OFF to deactivate the built-in speak- ers. The built-in speakers are automatically deactivated as headphones are connected to the PHONES jack regardless of the switch's position.

CAUTION

The sound through microphones (both built-in and external) does not come out of the built-in speakers. Use headphones when you want to monitor it.

6–Connection

Connecting to the EXT MIC jacks

You can connect microphones to the EXT MIC A (L) and EXT MIC B (R) jacks (XLR jacks) on the left side of the unit.

Microphones

CAUTION

•Slide the PHANTOM switch to ON after connecting microphones which need power supply, such as condenser microphones. Turn the switch oﬀ when using other types of microphones, such as dynamic ones. Otherwise the microphones may be damaged. Refer to the manual of the microphones for details.

•Do not connect/disconnect a microphone when the PHANTOM switch is ON.

Connecting to the LINE IN jack

You can connect the line output of an audio device to the LINE IN jack (RCA jack).

Connecting external microphones and an audio device

The unit can record sounds from external audio equipment as well as the built-in stereo microphones and you can record sounds using them. You can connect the equipment to the LINE IN jack and the external microphone jacks. See below how to connect them (For settings of the connections and input level, see “8-Recording”).

Audio device or external sound source

TASCAM BB-1000CD 35

Contents

OWNER'S MANUAL WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Page Cautions about Batteries CAUTION •DO NOT REMOVE THE PROTECTIVE HOUSING USING A SCREWDRIVER Playback What types of files can this unit play back To select files to play back on an SD card Recording What disc is recordable What is finalization To record in higher sound quality To record for a longer period of time To record sounds all around the unit by using the front and rear microphones To record sound using the front microphones only To record the sound of a tape recorder or record player Settings for flexible recording Assisting practice of an instrument Overdubbing on a playback sound Editing an audio file Copying music files Other useful functions 1–Introduction 2-Quickstart guide 3–PartNames and Functions 4–Preparation 9–Forpracticing musical instruments 12–Environmentalsettings 14–Troubleshooting Main features Included items Note about this manual Trademarks, copyrights, and disclaimers Precautions for use Cautions About CD-Rand CD-RWdiscs Preparation Powering the unit Connecting the AC adapter Installing the batteries Turning the power on and off Loading a disc Playing back Selecting the playback media Inserting an SD card Recording on an SD card Recording on a disc Recordable discs: Top panel Page Front Panel Rear Panel Left side panel Right side panel Remote control unit (RC-BB1000) Connecting the AC adapter Installing the batteries Installing the battery Battery replacement Precautions concerning batteries Precautions using the remote control unit Write protection Removing the SD card When using a new SD card Ejecting a disc Home screen Setting screen structure Operation basics Operation example Setting screen list Connecting to the EXT MIC jacks Connecting to the LINE IN jack Skipping a track a little backward (FLASH BACK) Playback from marked points Repeat playback Loop playback (I–OLOOP) Selecting the input Adjusting the input settings Adjusting the balance of microphones Adjusting the level of playback signal Preparation for overdubbing Overdub recording Preparation Chromatic tuner mode Oscillator mode Setting the metronome Starting and stopping the metronome Changing the playback key Practicing a certain phrase repeatedly Changing the playback speed Reducing sound of a certain location (PART CANCEL) Copying a CD onto an SD card Writing files on an SD card onto a disc Backing up an audio CD Auto recording Long time recording About the recording time Editing a file 2.Press the CURSOR [§/¶/˙/¥] key to select EDIT and press the ENTER key A pop-upwindow appears as below 4.Select an operation you want to apply to the selected file Finalizing a disc 2.Press the CURSOR [§/¶] key to select MEDIA and press the ENTER key The MEDIA CD screen appears 3.Press the CURSOR [§/¶] key to select FINALIZE and press the ENTER key The confirmation message appears Icons on the BROWSE screen File operations Screen navigation Folder operations To open the SET UP screen 1. Press the MENU key to open the MENU screen 2. Press the CURSOR [§/¶] key to select SET UP and press the ENTER key Backlight Auto OFF setting Adjust the display contrast Messages Meaning and remedy Page No power Remote control doesn't work No sound The sound to record hears distorted The sound is noisy CD recorder Dimensions