10–Other useful functions

9.Load a blank disc and press the F2 key.

The selected files are written onto the disc. If you want to make another copy, load a new blank disc following the messages on the screen after finishing and press the F2 key. Press the F1 key to finish and return to the COPY screen.

5.Load a blank disc and press the F2 key.

The duplication starts. The disc is automatically ejected after finishing duplication. If you want to make another copy, load a new blank disc and press the F2 key. Press the F1 key to finish and return to the COPY screen.

Backing up an audio CD

You can create a backup disc of an audio CD.

NOTE

An SD card which has free space enough to copy the contents of the CD is required for duplicating it.

1.Press the MENU key to open the MENU screen.

2.Press the CURSOR [§/] key to select COPY and press the ENTER key.

3.Press the CURSOR [§/] key to select CD BACKUP and press the ENTER key.

4.Load the SD card and the target CD and press the F2 key. The temporary copy to the SD card starts.

NOTE

A caution appears when the capacity is not enough. Insert an SD card with enough space and press the F2 key to proceed to the next step.

The CD is automatically ejected as the unit finish copying it onto the SD card and the message to prompt to insert a blank disc appears.

Changing recording settings

You can change the various settings relating to recording on the REC SETTING screen.

Auto recording

You can set the unit to start/stop recording automatically from recording-on-standby depending on the status of input signals. It is convenient when you need to start recording from the position far from the unit.

1.Press the MENU key to open the MENU screen.

2.Press the CURSOR [§/] key to select REC SETTING and press the ENTER key.

3.Adjust the four settings below.

AUTO LEVEL:

Set the signal level at which recording starts/stops auto- matically.

START:

While set to ON, recording automatically starts as the unit is on-standby for recording and detects an input sig- nal whose level is higher than that set on AUTO LEVEL.

STOP:

Set the time from detecting the input signal level lower than that set on AUTO LEVEL to stopping recording to on-standby.

DIVIDE:

When setting this to ON, the recording file is divided as the input signal level becomes higher than that set on AUTO LEVEL again after 2 second or more declining signal level.

44 TASCAM BB-1000CD