4.Use the DATA wheel to adjust the value and press the
CURSOR [¥] key .
The cursor moves to the next place.
5.After making the setting, press the F1 key to restart the clock from the newly set value.
The display returns to the SETUP screen.
NOTE
You cannot see the time and date information of audio files on the unit.
Write protection
An SD card has the write protection switch. When you try to record on a protected card, the error message “Protected Card” appears and you cannot record on it.
Inserting an SD card
Insert an SD card and push it until it clicks fully into place.
Removing the SD card
Press the inserted SD card.
NOTE
Do not remove the SD card during recording and playback, and while the SD indicator is flashing (writing data).
NOTE
The error message appears only when you try to record on a protected SD card. No message appears when the unit tries and fails to write information such as the order of audio files and the position of markers on the protected SD card.
Loading a disc
NOTE
You can load a disc while the unit is turned on.
1.Insert a disc halfway into the slot facing the label side front, as illustrated.
When using a new SD card
When using a new SD card, it is recommended to format it
on the unit before starting to use it. (∑ page 49 “Formatting an SD card”).
Using an SD card formatted on other devices or a PC may increase the possibility of recording errors.
CAUTION
Take enough care when formatting as all the data on an SD card, including those written by other equipment, will be erased.
2.Push the disc into the slot until the disc is automati- cally brought in.
CAUTION
•You cannot insert a disc when the unit is turned off.
•When a disc is not loaded properly, draw out the disc and press the øEJECT key, then try to load it again. DO NOT push the disc in forcedly. It may damage the unit and the disc.
30 TASCAM