4–Preparation

Powering the unit

You can use the supplied AC adapter or separately purchased AA batteries as the power source. Connect the AC adapter or install the batteries before use.

CAUTION

You cannot record on a disc when using the unit with battery power. Supply the power through the AC adapter.

Connecting the AC adapter

Connect the power cable to the AC adapter, the adapter to the unit, then connect the power cable to the AC outlet.

TASCAM PS-1225L

DC plug

AC cord holder

AC outlet

The left side panel of the unit has a dent for holding the cable of the AC adapter–the AC cord holder. Hook the cord in to the clipping of the holder to prevent unexpected disconnection of the cord.

Installing the batteries

Take off the battery case cover and install separately pur-

chased eight AA batteries observing the ± and — marks on the case.

NOTE

Batteries are not supplied with this product. It is recommended to use Ni-MH or alkaline batteries.

Remote control unit

Installing the battery

1.Pull out the battery holder.

2.Install a lithium coin battery (CR2025) facing the + side up.

CAUTION

•DO NOT hook the AC cord in forcedly. It may damage the cord.

•Uninstall the batteries when using the supplied AC adapter to keep the battery life longer.

3.Put in the battery holder.

Battery replacement

Replace the battery when the operatable range decreases or the unit becomes unoperatable through the remote control unit.

Use a lithium coin battery (CR2025) for replacement.

28 TASCAM BB-1000CD