nearest marker is indicated on the right side of the track number.
•Press the 
MARK key while pressing and holding the LOOP key to delete the marker whose name is currently indicated.
Repeat playback
You can play a track repeatedly.
Press the LOOP key. “ ” appears and the current track is played back repeatedly.
To stop the repeat playback, press the LOOP key.
Adjusting the volume
Use the VOLUME knob to adjust the output volume of the
Loop playback (I–O LOOP)
With this function, you can continuously repeat the playback of a selection that you make (loop playback).
1.Press the IN key during playback to set the point when you want to start loop playback. The current position is set as the IN point.
2.Press the OUT key at the point when you want loop playback to stop. The current position is set as the OUT point, and loop playback begins between the IN and OUT points.
•The current positions of the IN and OUT points are shown by the 
and 
icons that appear below the play- back position display bar in the lower part of the Home
screen. During loop playback the 
indicator also appears.
•Pressing the ¯ key during loop playback slides the start point of the loop forward to its end point, keeping the time length of the loop.
Pressing the  key during loop playback slides the end point of the loop back to its start point, keeping the time length of the loop.
•Press IN key or OUT key while pressing and holding the LOOP key to clear the start point or end point, respec- tively.
NOTE
•When the OUT point is not set, the part from the IN point to the end of the track is played back repeatedly.
•When the IN point is not set, from the beginning of the track to the OUT point is played back repeatedly.
•When the IN and OUT points is not set, the whole track is played back repeatedly.
To cancel the Loop playback, press the LOOP key. The IN point and the OUT point remain and the loop playback of the section starts again by pressing the LOOP key again.
TASCAM