Tascam CC-222MK Recording tapes from the Phono deck, Dubbing to tape from the middle of a CD

7- Cassette operations

sette is write-protected, or if the CD is a recordable disc which does not currently have any material recorded on it.

It is also not possible to enter the dubbing mode if the tape is not in stop or record standby mode, or if the CD is not in stop or pause mode.

Dubbing to tape from the middle of a CD

The above procedure describes the playback and recording from the start of a disc (or the start of a pro- grammed playback list).

To record from a point other than the ones above:

1Locate the disc to the point where the playback is to start.

2Press the disc PAUSE key to pause playback at the point where the playback is to start.

3If recording is to start at the beginning of the cassette, make sure the cassette is stopped, other- wise, locate the cassette to the appropriate posi- tion where recording is to start, and enter record standby mode.

Using the headphones with the MONITOR switch set to MIX will help here.

4Press the DUB 2 key. Playback starts on the disc, and recording starts on the cassette.

Recording tapes from the PHONO deck

To record from an external record deck connected through the RIAA PHONO inputs:

1Prepare for recording as described above (load a tape, set the REV MODE, etc.).

2Press the MENU key until the PHONO > XXX menu item is shown.

Turning the MULTI DIAL or pressing the SKIP keys on the remote control to select either TAPE.

Press the MULTI DIAL or ENTER on the remote control unit.

3Press the PHONO key. The PHONO indicator lights on the display.

If the tape is currently in stop mode, the tape rewinds, and the deck enters record standby mode (about eight seconds from the start of the cassette, to allow for leader tape).

If the tape deck is already in record standby mode, it will remain in record standby mode.

4Start playback of the record.

5Start recording with either the PLAY or PAUSE key.

Press STOP (cassette deck) to stop the recording. The STOP key is the only key which is enabled during phono recording.

NOTE

It is not possible to perform phono recording as described above under the following circumstanc- es: a tape is not loaded or the tape is write-protect- ed (the phono to tape function is disabled with no recordable tape inserted), or the tape is not either stopped or in record standby mode.

Only recording as described above is possible from the RIAA PHONO sources to tape. Manual record- ing is not possible.

TASCAM CC-222MKIII 31