1 – Introduction—Some notes and precautions
TASCAM CD-RW402 Owner’s Manual 9
disc, additional material can be recorded. The pack-
aging of CD-R discs will include one of the follow-
ing logos:
By contrast, a CD-RW disc can be used in much the
same way as a CD-R disc, but the last track or tracks
recorded can be erased before the disc has been
“finalize d”, and the space on the disc can be re- used
for other recordings. The packaging of CD-RW discs
will include one of the following logos:
However, you should note that an audio CD created
using a CD-RW disc may not play back satisfactorily
on every audio CD player. It will, naturally, be play-
able on the CD-RW402. This is in no way a limi ta-
tion of the CD-RW402 itself, but of the difference
between the different types of media and the methods
used to read them.
CD-R discs created on the CD-RW402, by contrast,
may be played satisfactorily on the majority of audio
CD players.

Handling of compact discs

Observe the following:
•Always place compact discs in the tray with their
label facing upward (compact discs can only be
played on one side).
•To remove a disc from its storage case, press down
on the center of the case, and lift the disc out, hold-
ing it carefully by the edges.
•Finger marks and dust should be carefully wiped
off the disc’s recorded surface with a soft cloth.
Unlike conventional records, the compact disc has
no grooves to collect dust and microscopic debris,
so gently wiping with a soft cloth should remove
most particles.
•Wipe in a straight motion from the inside to the
outside of the disc. Small dust particles and light
stains will have absolutely no effect on reproduc-
tion quality.
•Never use such chemicals as record sprays, anti-
static sprays or fluid, benzine or thinner to clean
compact discs. Such chemicals w ill do irreparable
damage to the disc’s plastic surface.
•Discs should be returned to their ca ses after use to
avoid serious scratches that could cause the laser
pickup to “skip”.
•Don’t expose discs to direct sunlight or high
humidity and temperature for extended periods.
Long exposure to high temperature can warp the
disc.
•Only use circular compact discs. Avoid using non-
circular promotional, etc. discs.
•To keep the laser pickups clean, don’t touch them.
For the same reason, don’t leave the disc trays
opened unnecessarily.