
2 − Names and Functions of Parts
wDISPLAY (SHIFT) key (CD and iPod)
When the output source is set to CD, press this key to change the type of time and text information shown on the display. When this key is pressed, the type
of information currently displayed is shown for two seconds. Press the key again during this time to change the type of information shown. The information that can be shown depends on the type of disc and the status of operation. (See “Time and text information display” on page 28.)
When iPod is selected, you can switch whether its video is shown on the iPod itself or output through this unit’s
VIDEO OUT jack.
You cannot, however, switch the video output destination during video playback. Switch it while the iPod is stopped or stop the playback once and then switch it if the iPod is already playing back.
If switched during video playback, the new output destination is used when playback is stopped then started again.
When pressed at the same time as another key, this key acts as the shift key, enabling the functions labeled under each key in black characters on a white background.
ePLAY MODE/INTRO CHECK (SOURCE SEL) key (CD and iPod)
When the output source is set to CD, press this key briefly to change the playback mode. The three types of playback modes are continuous, shuffle and programmed. (See “Playback modes” on page 25.)
During playback or when stopped, press and hold this key to use the intro check playback feature. The beginning of each track on the CD plays for 10 seconds in order. During intro check playback, press and hold this key again to return to the previous playback mode and continue playing the current track. (See “Intro Check” on page 30.)
Press this key while holding down the DISPLAY
(SHIFT) key to cycle through the sound output sources in the following order (see “Changing the output sound source” on page 20.):
When the output source is set to iPod, press to cycle through the three iPod shuffle modes, which include Off, Song and Album.
•• The intro check function cannot be used with iPods.
•• iPod and AUX IN cannot be selected if devices are not connected to this unit.
Press this key while holding down the DISPLAY (SHIFT) key to turn the pitch control function ON and OFF. (See “Pitch control” on page 29.)
The pitch control function cannot be used with iPods.
tFOLDER ˙/¥ (PITCH
Use these keys when the output source is set to CD and a data CD is loaded to change the playback folder. Select ALL to set the entire disc as the playback area. (See “Folder playback (with data CDs only)” on page 24.)
When the output source is set to iPod, use these to select (skip between) albums.
Use these keys while holding down the DISPLAY
(SHIFT) key to set the pitch control value. (See “Pitch control” on page 29.)
The pitch control function cannot be used with iPods.
iPod dock
yCLOSE button
Press this button to unlock the iPod dock when you want to close it.
To close the iPod dock, press the dock panel while pressing and holding this button.
rREPEAT (PITCH ON/OFF) key (CD and iPod)
Press this key to cycle through the repeat playback modes in the following order (see “Repeat playback” on page 28.):
10 TASCAM