4 − Playing Back CDs

CAUTION

•• During playback, turning pitch control playback ON or OFF might cause the playback sound to skip momentarily.

•• Using pitch control playback with a data CD (MP3, WAV) sometimes causes the playback sound to skip.

•• Digital output is possible when the pitch control function is ON during playback of MP3 and WAV files on audio CDs, but the sampling frequency is changed by an amount proportional to the pitch control value. When pitch control is ON, therefore, some equipment might not be able to receive the digital output signal from the CD-200i.

•• The pitch control function cannot be used with iPods.

Intro Check

During playback or when stopped, press and hold the PLAY MODE/INTRO CHECK (SOURCE SEL) key on the main unit or the INTRO CHECK key on the remote control to playback only the first 10 seconds of each track.

The INTRO indicator lights when this function is ON.

When Intro Check is ON, press and hold the PLAY MODE/INTRO CHECK (SOURCE SEL) key on the main unit or the INTRO CHECK key on the remote control again to return to the continuous playback mode and turn the INTRO indicator OFF.

PLAY MODE/INTRO CHECK (SOURCE SEL) key

INTRO CHECK key

•• When using Intro Check, press the SEARCH

Ô/(Â/¯) keys on the main unit or the search (Ô/Â, ¯/) keys on the remote control to skip to the preceding or next track.

•• Press the STOP key to stop Intro Check.

•• The intro check function can be used with data CDs.

•• The intro check function can be used during program and folder playback modes.

•• The intro check function cannot be used with iPods.

30 TASCAM CD-200i