•• If you press the STOP key when the empty program step where it is possible to add a track appears, all steps in the program are cleared.

•• If you try to add more than 99 tracks, a “PGM FULL” error message appears. Only 99 tracks can be added.

Checking the program

You can check the contents of the program.

1Press the PROGRAM EDIT key on the remote control while playback is stopped to put the unit into pro- gram setting mode.

The track number and playback time of the track set as program step 01 is shown on the screen (playback time is not displayed if the loaded disc is a data CD) and MEMORY blinks.

Program step

Track number Playback time

2Press the PROGRAM EDIT key to show the track information of the next program step.

3If you press the PROGRAM EDIT key when the final program step is shown, it becomes possible to add another program step. (No track number is dis- played and the MEMORY indicator blinks.)

4Press the PROGRAM EDIT key again to exit the pro- gram setting mode.

Replacing a program track

You can replace a track that has already been added to the program.

1Press the PROGRAM EDIT key on the remote control while playback is stopped to put the unit into pro- gram mode.

2Follow the steps in “Checking the program” above and press the PROGRAM EDIT key to show the pro- gram step with the track that you want to replace.

3Use the numeric keys or skip (Ô/Â, ¯/) keys to select the desired track and press the

PROGRAM EDIT key.

4 − Playing Back CDs

After replacing a track, the display shows the empty step at the end of the program and you can add another track to the end of the program if desired.

4.Press the PROGRAM EDIT key again to exit pro- gram setting mode.

Adding more program tracks

You can add tracks to the end of an already set program.

1.Press the PROGRAM EDIT key on the remote control while playback is stopped to put the unit into pro- gram setting mode.

2Press the PROGRAM EDIT key until the empty program step where it is possible to add a track appears. (No track number is displayed and the MEMORY indicator blinks.)

3Use the numeric keys or skip (Ô/Â, ¯/) keys to select a track and press the PROGRAM EDIT key.

4In this state, you can repeat step 3 to add more tracks, or you can press the PROGRAM EDIT key to exit program setting mode.

CAUTION

•• Although tracks can be added to the end of a program and tracks can be replaced with different tracks, tracks cannot be inserted into the middle of a program.

•• If you want to insert a track into the middle of the program, replace and add program tracks to alter the program contents.

Clearing the program

You can clear the entire program that has been set.

1Press the PROGRAM EDIT key on the remote control while playback is stopped to put this unit into pro- gram setting mode.

2Press the PROGRAM EDIT key until the empty pro- gram step appears. (No track number is displayed and MEMORY blinks.)

3Press the STOP key. “-CLEAR-” appears on the display. After the program is cleared, program set- ting mode resumes without any tracks added to the program.

In addition to the above procedure, opening the disc tray also clears the program.

TASCAM CD-200i 27