2 − Names and Functions of Parts
77FOLDER ˙/¥ keys (CD and iPod)
Use these keys when the output source is set to CD and a data CD is loaded to change the playback folder. Select ALL to set the entire disc as the playback area. (See “Folder playback (with data CDs only)” on page 24.)
When the output source is set to iPod, use these to select (skip between) albums.
88Ô/Â key (CD and iPod)
Press briefly to select tracks (skip). Press and hold to search a track.
99¯/ key (CD and iPod)
Press briefly to select tracks (skip). Press and hold to search a track.
0OPEN/CLOSE key (CD)
Use to open and close the disc tray.
qPROGRAM EDIT key (CD)
When the output source is set to CD, use this to make, confirm and edit program settings. (See “Programmed playback” on page 25.)
wREPEAT key (CD and iPod)
Press this key to cycle through the repeat playback modes in the following order:
ePITCH +/– keys (CD)
Use these keys to set the pitch control value. (See “Pitch control” on page 29.)
rSTOP key (CD and iPod)
When the output source is set to CD, press this key to stop playback.
When the output source is set to iPod, press this key to pause playback.
tPLAY/READY key (CD and iPod)
Press during playback to pause. When playback is stopped or paused, press to start playback.
14 TASCAM