3 − Preparation for Use

Removing the iPod

◯

 

•• Before connecting or disconnecting an iPod, set the output source to CD or AUX (not iPod), or turn the CD player’s power OFF.

•• When connecting and disconnecting an iPod, align it with the dock connector and proceed gently to prevent putting pressure on the dock connector.

×

××

×

Connecting external audio players

By using the AUX IN input on the front panel of this unit to connect the analog outputs of other audio players and iPods that do not have dock connectors, you can transmit the output of these devices from the output jacks of this unit. Since the AUX IN does not have an input level adjustment, adjust the output level of the connected device.

CAUTION

•• Minimize the volume of an external device before connecting it to the AUX IN. Failure to do so could cause a sudden burst of loud noise, which might result in hearing damage, for example.

•• Before connecting or disconnecting something to the AUX IN jack, set the output source to CD or iPod (not AUX), or turn the CD-200i’s power OFF.

18 TASCAM CD-200i