3 − Preparation for Use
Changing the output sound source
For the audio signal output by this unit, the CD playback sound, the playback sound of the iPod connected to the iPod dock or the sound input through the AUX IN jack can be selected.
Press the PLAY MODE/INTRO CHECK (SOURCE SEL) key while pressing the DISPLAY (SHIFT) key on the front panel, or press the SOURCE SELECT key on the remote control.
PLAY MODE/INTRO CHECK (SOURCE SEL) keySOURCE SEL key
CAUTION
•• iPod and AUX IN cannot be selected if devices are not connected to this unit.
•• When changing the output source from CD to iPod, CD playback or paused mode is stopped. Moreover, when changing the output source from iPod to AUX IN, if the iPod is playing, playback pauses.
Even when the output source is changed, CD playback mode settings, the current folder and program contents are not erased.
By the above operation, the sound output sources will cycle through in the following order:
[When the output source is iPod]
[When the output source is AUX IN]
20 TASCAM