4 − Playing Back CDs

•• To select programmed playback, press the PLAY MODE/INTRO CHECK (SOURCE SEL) key on the main unit or the PLAY MODE key on the remote control when playback is stopped or no CD is loaded.

•• During folder playback, only tracks in the current folder can be included in a program.

Setting the program

When no program is set, follow the procedures below to set a program using the remote control.

•• The program cannot be set from the main unit.

•• You can set a program at any time regardless of the current playback mode.

•• The program is cleared when the disc tray is opened.

1Press the PROGRAM EDIT key while playback is stopped.PROGRAMEDIT key

The unit enters program setting mode, and if no program has been set, it will be possible to set a track to program step 01 (MEMORY indicator blinks).

[Audio CD]

[Data CD]

If the program is already set, the track number and playback time of the track set as program step 01 is shown.

2Use the numeric keys or search (Ô/Â, ¯/) keys to select a track to set as program step 01.

(The MEMORY indicator and the track number blink.) When using the numeric keys, input the number starting with the leftmost digit.

Program step
Track number

Playback time

[Audio CD]

[Data CD]

•• When using a data CD, the screen switches to file name display if more than a second passes

after pressing a numeric key or search (Ô/Â,

¯/) key, but it is still possible to add the track to the program.

•• If you press the STOP key while a track is selected, selection of that track is canceled, and the screen returns to the state where you can select a track.

3Press the PROGRAM EDIT key.

The selected track is added to program step 01. The unit is now ready for you to add another track for the next program step.

4By repeating steps two and three above, you can add more tracks sequentially as desired.

5If you are finished adding tracks to the program, press the PROGRAM EDIT key when the empty program step where it is possible to add a track appears. The unit exits program setting mode.

•• The same track can be added to the program multiple times.

26 TASCAM CD-200i