2–Quick Start Guide

Follow these steps to use the built-in mics (UNI MIC) to record and playback your recording.

Turn the power on

1Prepare the power supply.

To use battery power, install a charged lithium ion battery or AA batteries. (See “Using with batteries” on page 17.)

Types of batteries that can be used

•• Lithium ion battery (included)

•• AA alkaline batteries (LR6)

•• AA Ni-MH batteries (HR15/51)

NOTE

•Manganese dry cell batteries (R6) cannot be used with this unit.

•This unit cannot recharge Ni-MH batteries. Use a commercially available recharger.

Installation of the lithium ion battery

Installation of the AA batteries

Never use any adapter other than the designated PS-P520 AC adapter. (See "Using an AC adapter (sold separately)" on page 18.) Use of a different adapter could cause malfunction, fire or electric shock.

10 TASCAM DR-100

(sold separately)

AC outlet

DC plug

2Insert an SD card.

Insert a new SD card or one that has been formatted for use with this unit. (See “Inserting and removing SD cards” on page 20.)

NOTE

•An SD card is already installed when the unit is shipped from the factory. If you want to use this card to record and play tracks, there is no need to reinstall it.

•The included SD card is already formatted.

3Turn the power ON.

Press and hold the POWER key to turn the power

ON.