Using with batteries
This unit can be powered by both a lithium ion battery and two AA batteries.
By using both types of batteries together, the unit can be operated continuously for a long time.
Moreover, one type of battery can be changed while the unit continues to operate when, for example the charge becomes low in one of the batteries.
Types of batteries that can be used
•• Lithium ion battery (included)
•• AA alkaline batteries (LR6)
•• AA
NOTE
•Manganese dry cell batteries (R6) cannot be used with this unit.
•This unit cannot recharge
Using the lithium ion battery
Open the battery compartment cover on the side of the unit, and insert the battery into the
compartment with the correct orientation.
Charging the lithium ion battery
There are two ways to charge the lithium ion battery.
Charging with an AC adapter
Connect a
to the unit's DC IN 5V connector. Charging takes about three hours. (See “Using an AC adapter (sold separately)” on page 18.)
Charging with a computer
Connect with a computer using the included USB cable. Charging takes about six hours. (See
NOTE
•Connect this unit to the computer directly. Proper operation cannot be guaranteed when using a USB hub.
•When connected by USB, recharging occurs even if the unit’s power is off.
•When recharging with a computer, this unit enters the USB mode, so other functions cannot be used.
•The CHARGE indicator lights while charging and turns off when charging is complete.
Using AA batteries
Open the battery compartment cover on the back of the unit, install the batteries with the correct +/- orientation and close the battery compartment cover.
When using AA batteries, set the type of battery in order to accurately show the amount of power remaining and allow the unit to accurately determine whether power is available for proper operation. (See “Setting the type of AA batteries (AA BATTERY)” on page 45.)
TASCAM