6–Recording

Automatically pausing recording (PAUSE)

You can set the unit to automatically pause after the input level of the recording becomes less than the END LEVEL setting and the END DELAY time passes.

1Press the AUTO key to open the AUTO RECscreen.

2Set the MODE item to PAUSE.

3Set the value of the END LEVELitem.

4Set the value of the END DELAYitem.

5Press the HOME key to return to the Home

Screen.

6Press the RECORD (º) key while holding down the AUTO key to put the unit into recording standby.

Recording starts automatically when the input signal exceeds the START LEVELvalue.

NOTE

Press the STOP (ª) key to stop automatic recording.

Start new files automatically during recording (TRK INC)

A new file can be created automatically during recording when, after once becoming less than the end level, the input signal exceeds the start level again.

1Press the AUTO key to open the AUTO RECscreen.

2Set the MODE item to TRK INC.

3Set the value of the END LEVELitem.

4Set the value of the START LEVELitem.

5Press the HOME key to return to the Home

Screen.

6Press the RECORD (º) key while holding down the AUTO key to put the unit into recording standby.

Recording starts automatically when the input signal exceeds the START LEVELvalue.

30 TASCAM DR-100

NOTE

•Press the STOP (ª) key to stop automatic recording.

•You can also create new files manually. (See “Dividing a recorded file manually (DIVIDE)” on page 28.)

•When new files are created, incremental numbers are added to the end of each file name.

CAUTION

•A new file cannot be created if the total number of files and folders would exceed 999.

•Files shorter than two seconds cannot be created.

•If the name of a new created file would be the same as that of an existing file, the number will be incremented until the new file has a unique name.

Mark function

Adding marks manually to a recording

You can manually add marks to a recording where you want them.

Press the ENTER/MARK key while recording to add a mark.

NOTE

•A mark is automatically added when you restart recording after temporarily pausing.

•Mark information is stored in the file with numbers between 01–99. The maximum number of marks in a file is 99.

Moving to a mark position

You can move to marks in the currently selected file when paused and during playback.

You can use this function to identify points to create shortcuts to the beginning of songs, for example.

Press the Â/¯ keys while pressing and holding the ENTER/MARK key during playback or when stopped.

NOTE

You cannot move to a mark in a different file.