5 − Playback

Using the remote’s dedicated key to turn Key Control on/off

You can use the remote’s KEY key to turn Key Control on/ off.

NOTE

You can’t adjust the key level from the remote.

KEY key

Auto Cue function

If the Auto Cue function is on, and you select a track to play and then enter pause mode, any “silent” portion at the beginning of the track will be skipped, and the SS-R1 will pause at the location where the actual “signal” of the track begins to rise. This means that sound will be heard immediately when you start playback.

You can specify the threshold level (= auto cue level) used to detect the audio signal when the Auto Cue function is active. In other words, any signal higher than the auto cue level will be treated by the SS-R1 as “signal”, and any signal lower than this level will be treated as “silence”.

The following procedure describes how you can use the menu to turn the Auto Cue function on/off and adjust the Auto Cue Level setting (for details on operations in the menu screen, refer to “Operations in the menu screens” on page 16).

1Press the MENU key to access the main menu list screen.

2 Select the PLAY menu.3 Select the AUTO CUE item.

In this state, you can turn the Auto Cue function on/off.

4 Turn the AUTO CUE item ON.

5 Press the front panel ˚ key (or the remote’s CURSOR ¥ key).

In this screen you can adjust the auto cue level.

6Turn the front panel MULTI JOG dial (or use the remote’s CURSOR § , ¶ keys) to select the de- sired Auto Cue Level, and then press the front panel ˚ key (or the remote’s CURSOR ¥ key).

You can select an auto cue level in the range of -24 dB

– -72 dB (6 dB steps).

7When you’ve finished making the setting, press the front panel TIME (ESC) key (or the remote’s CLR/ESC key) to return to the home screen.

If the Auto Cue function is on, A_CUE will be lit in the home screen.

NOTE

The Auto Cue setting is remembered even if the power is off.

28 TASCAM SS-R1