6 − Recording

Using the sampling rate converter

The SS-R1 contains a built-in sampling rate converter,

5 Select SRC.

allowing you to record at a sampling rate that is different

 

 

 

 

than the sampling rate of the digital input source.

 

 

Use the menu to turn the sampling rate converter (SRC) on/

 

 

off (for details on menu operations, refer to “Operations in

 

 

the menu screens” on page 16).

 

 

1Press the MENU key to access the main menu list screen.

2 Select the REC menu.

3 Highlight the PREFERENCE item.

4Press the front panel ˚ key (or the remote’s CURSOR ¥ key) to proceed to the REC PREF-

ERENCE screen.

6Turn the MULTI JOG dial (or use the remote’s CURSOR § , ¶ keys) to turn the SRC setting ON/

OFF.

7When you’ve finished making the setting, press the front panel TIME (ESC) key (or the remote’s CLR/ESC key) to return to the home screen.

NOTE

•If a digital signal whose sampling rate differs from the sampling rate specified in the REC FORMAT item is being received at the DIGITAL IN jack, and you attempt to record with SRC off, an error message (FS UNMATCH) will appear.

•The sampling rate setting is remembered even when the power is turned off.

Monitoring the input signal

When you press the READY key to enter the record-ready condition, the front panel RECORD key and READY key will light, and the input signal will be output from the SS- R1’s various output jacks (headphone, analog balanced, analog unbalanced, and digital). The meter in the home screen will indicate the input level.

STOP key RECORD keyREADY key

TIP

•If you simply want to monitor the input signal without intending to record anything, press the RECORD key without a CompactFlash card insert- ed. The display will indicate MONITOR, and the RECORD key will blink red.

•To stop monitoring the input signal, press the STOP key.

To cancel the record-ready condition, press the STOP key.

36 TASCAM SS-R1