6 − Recording

•If DDis selected

As when LEVELis selected, use the DELAY item to specify the time from when a signal exceeding the auto track level is detected until the new track num- ber is assigned, in steps of one frame (one frame is 1/75 of a second).

•If TIMEis selected

Use the INTERVAL item to specify the time interval at which the track number is assigned, in a range of 1 –10 seconds (one-second steps).

7When you’ve finished making settings, press the front panel TIME (ESC) key (or the remote’s CLR/ESC key) to return to the home screen.

NOTE

This setting is remembered even when you turn off the power.

Using the remote’s dedicated key to switch modes

Each time you press the remote’s A.TRACK key, the Auto Track function mode will cycle in the order of OFF∑

LEVEL∑ DD∑ TIME.

Assigning a new track number manually

You can assign a new track number manually by pressing the RECORD key during recording.

However, you cannot create a track that is shorter than four seconds.

NOTE

If you recorded in WAV format, you can use the editing functions to divide or join tracks after they have been recorded (see “Operations in the file menu screen” on page 50).

42 TASCAM SS-R1