1 − Introduction

Thank you for your purchase of the TASCAM SS-R1 Solid State Stereo Audio Recorder.

Before connecting and using the unit, please take time to read this manual thoroughly to ensure you understand how to properly set up and connect the SS-R1, as well as the operation of its many useful and convenient functions. After you have finished reading this manual, please keep it in a safe place for future reference.

NOTE

This product is designed to help you record and reproduce sound works to which you own the copyright,

or where you have obtained permission from the copyright holder or the rightful licensor. Unless you own the copyright, or have obtained the appropriate permission from the copyright holder or the rightful licensor, your unauthorized recording, reproduction or distribution thereof may result in severe criminal penalties under copyright laws and international copyright treaties. If you are uncertain about your rights, contact your legal advisor. Under no circumstances will TEAC Corporation be responsible for the consequences of any illegal copying performed using the SS-R1.

Features of the SS-R1

•A two-channel audio recorder that uses CompactFlash cards.

•Can be mounted in a single rack space.

•Allows recording and playback of 16-bit linear PCM audio or MP3 audio, at sampling frequencies of 44.1 kHz or 48 kHz.

•Provides parallel and serial control ports to allow control from outside.

•Flash Start function allows playback to begin instantly.

•Playback control functionality such as Pitch Control and Key Control.

•Play lists and folders can be used to freely specify the range of playback.

•Track editing functionality is provided (for linear PCM audio only).

•An internal clock is provided for time stamping.

•Balanced and unbalanced analog audio inputs and outputs as well as coaxial digital audio input and output are provided.

•Wired remote control for reliable operation is provided.

•A PS/2 keyboard can be connected to control the unit or to enter text.

Supplied accessories

In addition to this manual, the SS-R1 has been packed with the following:

• RC-SS1 remote control unit (with 5m cable) .................

1

• AC power cable...............................................................

1

• A rack-mounting screw kit (screws and washers)...........

1

• Security Screw................................................................

2

• A warranty card..............................................................

1

Contact your TASCAM supplier if any of these items are missing.

Rack-mounting the unit

If you are mounting the unit in a rack, leave 1U of space above it and 4 inch (10 cm) or more of space at the rear.

Use the rack-mounting kit to mount the unit in a standard 19-inch equipment rack, as shown in this section. Remove the feet of the unit before mounting.

About this manual

In this manual, we use the following conventions:

•The names of keys and controls are given in the follow- ing typeface: MENU.

•If a preset indicator in the display (i.e. one which cannot change, but is either on or off) is shown, this is shown as follows: A_TRACK.

•When the alphanumeric portion of the display shows a message (inc. pop-up), selectable value (i.e. values of DB), or ON/OFF selection (i.e. SRC ON), this is shown in the following typeface: MOVE

TASCAM SS-R1