Parameter

Settings

Description

 

(Bold=default)

 

 

 

 

Interval

10S

Selects the length of time that the

 

(second)

camera will “wait” until it responds to

 

default,

any additional triggers from the PIR

 

with a 60M

after an animal is first detected and

 

(minute)

remains within the sensor’s range.

 

to1S

During this user set “ignore triggers”

 

(second)

interval, the camera will not capture

 

range of

photos/videos. This prevents the card

 

settings

from filling up with too many redundant

 

available.

images. Settings begin with 10 second

 

 

default when parameter is first selected.

 

(60M-1M

Note: after setting down past “1S”, settings

 

are set in

start over at “60M”.

 

one minute

 

 

increments,

 

 

59S-1S

 

 

are set in

 

 

one second

 

 

increments)

 

 

 

 

Sensor Level

Normal,

Selects the sensitivity of the PIR

 

Low, High

sensor. The “High” setting will make

 

 

the camera more sensitive to infrared

 

 

(heat) and more easily triggered by

 

 

motion, and the “Low” setting makes it

 

 

less sensitive to heat and motion. The

 

 

High setting can be useful when the

 

 

ambient temperature is warm (making

 

 

it more difficult for the sensor to detect

 

 

animals), and the Low setting may help

 

 

in cold weather if the camera is being

 

 

triggered too often by anything warmer

 

 

than the surroundings.

 

 

 

17

Page 17
Image 17
Tasco 119422 instruction manual Parameter Settings Description, Interval, Start over at 60M, Sensor Level