Tasco 119422 instruction manual Time Lapse, Video Sound, Default Set, Only affects, Video clips

Parameter	Settings	Description
	(Bold=default)
Time Lapse	On, Off	Turns Time Lapse recording mode on/
		off. Pressing OK after selecting On will
		change to the Set Time Lapse screen,
		which allows you to set the Start and
		Stop times in hours (0-24) and minutes
		(00-59).These set the times each day
		that recording begins and ends (24
		-hr clock, so 13:00 hours=1PM). Use
		the RIGHT key to step through the
		fields, and use UP/DOWN to change
		the settings. After you set the “Stop”
		minutes, the next press of the RIGHT
		arrow key will jump to the screen for
		setting the Interval (how often the Trail
		Cam will "wake up" and record). You
		can select 60, 30, 15, 5 or 1 minutes
		(default is 5M).
Video Sound	On, Off	Select “On” to record audio along with
(only affects		the video when the camera is set to
video clips)		video mode (saved file sizes will be
		slightly larger).
Default Set	Cancel,	Select “Execute” and press OK to
	Execute	restore all parameters to the original
		factory default settings. If the camera is
		behaving oddly and you think you may
		have changed the setting for something
		accidently (but aren’t sure which one),
		this will reset all parameters to their
		most commonly used or “generic”
		settings.

19